KRASO Sealing Insert Universal DD
for installation of pipes or cables, double sealing against
pressing water up to 3 bar. Can also be used as blind plug for feed-through of
pipes or cables (except KRASO Universal 250 DD and Universal 250 DD/T) | DafStB
waterproof concrete guideline: stress class 1 + 2Simple, tight, universal use
+ For core drillings or casings
+ Onion ring technology: universal use for various external
diameters of media pipes or cables!
+ KRASO Sealing Insert quality: non-corrosive stainless
steel V2A, high quality 40 mm rubber seal, welded-on studs instead of through bolts
+ Torque Control Nut KRASO DKM: integrated torque limiter -
no torque wrench required!
+ MPA-tested: protects reliably against pressing water up to
3 bar!
+ Gas- and odour-tight – high-quality in terms of TA-Air!
+ Radon tightness IAF tested - meets the requirements for
radon precautionary areas according to FHRK leaflet MB 101!
+ Tested according to FHRK test specification GE 101!
+ DafStB waterproof concrete guideline: stress class 1 + 2
KRASO Sealing Insert Universal DD/M
for simultaneous installation of up to 5 cables or pipes,
double sealing against pressing water up to 3 bar, Torque Control Nut KRASO DKM,
non-corrosive stainless steel V2A, 40 mm seal. Can also be used as blind plug
for feed-through of pipes or cables | DafStB waterproof concrete
guideline: Stress class 1 + 2
Simple, tight, universal use
+ For core drillings or casings
+ Onion ring technology: universal use for various
external diameters of media pipes or cables!
+ KRASO Sealing Insert quality: non-corrosive stainless
steel V2A, high quality 40 mm rubber seal, welded-on studs instead of
through bolts
+ Torque Control Nut KRASO DKM:
integrated torque limiter - no torque wrench required!
+ MPA-tested: protects reliably against
pressing water up to 3 bar!
+ Gas- and odour-tight – high-quality in terms
of TA-Air!
+ Radon tightness IAF tested - meets the requirements for
radon precautionary areas according to FHRK leaflet MB 101!
+ Tested according to FHRK test specification GE 101!
+ DafStB waterproof concrete guideline: stress class 1 +
2
KRASO Sealing Insert Type ED + DD + VD
for installation of pipes, Torque Control Nut KRASO DKM, non-corrosive stainless steel V2A, single sealing, against pressing water up to 1 bar, 20 mm seal (KRASO Type ED, KRASO Type ED/T), double sealing, against pressing water up to 3 bar, 40 mm seal (KRASO Type DD, KRASO Typ DD/T), quadruple sealing, against pressing water up to 8 bar, 80 mm seal (KRASO Type VD) | DafStB waterproof concrete guideline: Stress class 1 + 2Simply just better+ For core drillings or casings+ KRASO Sealing Insert quality: 5 mm thick clamping plates made of non-corrosive stainless steel V2A, a specially developed rubber mixture with even better sealing characteristics, welded-on studs instead of through bolts, more studs for an even pressure distribution
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!
+ Tested gas-tight according to DIN EN 13611 (chapter 7.12) proven
by the DVGW research centre at the Engler-Bunte-Institute (EBI) of the Institute for
Technology in Karlsruhe
+ MPA-tested: protects reliably against pressurised water up
to 10 bar!
+ Gas- and odour-tight – high-quality in terms of TA-Air!
+ Radon tightness IAF tested - meets the requirements for
radon precautionary areas according to FHRK leaflet MB 101!
+ Tested according to FHRK test specification GE 101!
+ KRASO Sealing Insert Configurator –
simple and fast: configure the matching sealing insert online or via our app!
KRASO Sealing Insert Type SD
for installation of pipes or cables, Torque Control Nut KRASO DKMKRASO Type SD 30 / KRASO Type SD 30 - T, split / KRASO Type SD 30 - GF, large flangeKRASO Type SD 60 / KRASO Type SD 60 - T, split / KRASO Type SD 60 - GF, large flange
| DafStB waterproof concrete guideline: Stress class 1 + 2
The solution for special situations+ For core drillings and casings+ Individual and custom-made solution: with large flange or split!+ KRASO Sealing Insert quality: 5 mm thick clamping plates made of non-corrosive stainless steel V2A, 30 or 60 mm seal made of a specially developed rubber mixture, welded-on studs instead of through bolts
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ MPA-tested: protects reliably against pressing water up to 2,5 / 5 bar!+ Gas and odour tight - High-quality in terms of TA-Air!+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101!
+ Tested according to FHRK testing specification GE 101!+ With arrangement template: see the arrangement of media lines, pipes and cables at a glance!+ Generally available within 24 hours!+ Available at an additional charge: non-corrosive stainless steel V4A / KTW - recommendation / NBR - oil- and petrol resistant / temperature resistant up to 220°C+ DafStB waterproof concrete guideline: Stress class 1 + 2.
Configure Sealing Insert
KRASO Sealing Insert Universal Multiple - split -
for simultaneous installation of several media lines/cables, split design for retrofit installation | DafStB waterproof concrete guideline: Stress class 1 + 2
Universally usable - multiply flexible+ For core drillings and casings
+ Stepless onion ring technology: universally usable for various external diameters of media lines/cables - even with several drillings! Split design for retrofit installation!
+ KRASO Sealing Insert quality: 5 mm tick clamping plates made of non-corrosive stainless steel V2A, 40 mm seal made of specially developed rubber mixture, welded-on studs instead of through bolts
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!
+ MPA-tested: protects reliably against pressing water up to 2,5 bar!+ Gas and odour tight - high-quality in terms of TA-Air!+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101!+ DafStB waterproof concrete guideline: Stress class 1 + 2.
KRASO Sealing Insert Type GR
for installation of ribbed or corrugated media pipes | DafStB waterproof concrete guideline: stress class 1 + 2
The sealing insert for ribbed media pipes
+ For corrugated and ribbed pipes!+ With a specially developed soft rubber seal - double the sealing with 40 mm seal or quadruble sealing with 80 mm seal - and central pressure disk for even pressure distribution
+ KRASO Sealing Insert quality: 5 mm thick clamping plates made of non-corrosive stainless steel V2A, more studs for even pressure distribution, welded-on studs instead of through bolts.+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ MPA-tested: protects reliably against pressing water up to 1 bar / 2 bar!+ Gas- and odour-tight - high quality in terms of TA-Air!+ Radon tightness IAF-tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101!+ Tested according to FHRK test specification GE 101!+ DafStB waterproof concrete guideline: Stress class 1 + 2.
KRASO Sealing Insert Type IN-GR - split -
internal sealing insert for cable protective hoses Type-R / corrugated pipes for the installation of one or several media lines or cables | DafStB waterproof concrete guideline: Stress class 1 +
2
Inner seal for ribbed media pipes+ Sealing insert for the internal sealing of one or several media lines in cable protective hoses Type-R+ Stepless onion ring technology: universally suitable for a wide range of external diameters of media lines/cables - even for multiple installation of media lines/cables! Split design for retrofit installation!
+ Torque Control Nut KRASO DKM:
integrated torque limiter - no torque wrench required!+ Non-corrosive stainless steel V2A, 30 mm seal
+ DafStB waterproof concrete guideline: stress class 1 +
2
KRASO Sealing Insert Type TD-X
for installation of pipes| DafStB waterproof concrete guideline: Stress class 1 + 2
The trio seal of a superior class
+ For core drillings or casings+ 20% thicker steel plates made of non-corrosive stainless steel V2A!
+ Triple sealing with a 60 mm seal made of specially developed sealing rubber!+ Two circular pressure disks guarantee optimal pressure distribution!+ More studs for even pressure distribution, welded-on studs instead of through-bolts!
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!
+ MPA-tested: protects reliably against pressurised water up to 10 bar!+ Gas and odour tight - high-quality in terms of TA-Air!+ Radon tightness IAF-tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101!
+ Tested according FHRK testing specification GE 101!
+ DafStB waterproof concrete guideline: Stress class 1 + 2.
KRASO Sealing Insert Type FIX
for installation of pipes, with mounting bracket for fixing to the wall, Torque Control Nut KRASO DKM, non-corrosive stainless steel V2A, single sealing, against pressing water up to 1 bar, 20 mm seal (KRASO Type ED/FIX), double sealing, against pressing water up to 3 bar, 40 mm seal (KRASO Type DD/FIX) | DafStB waterproof concrete guideline: stress class 1 + 2
Simply just better+ For core drillings or casings
+ KRASO Sealing Insert quality: 5 mm thick
clamping plates made of non-corrosive stainless steel V2A, a specially
developed rubber mixture with even better sealing characteristics, welded-on
studs instead of through bolts, more studs for an even pressure distribution
+ Torque Control Nut KRASO DKM:
integrated torque limiter - no torque wrench required!
+ Tested gas-tight according to DIN EN 13611 (chapter
7.12) proven by the DVGW research centre at the
Engler-Bunte-Institute (EBI) of the Institute for Technology in Karlsruhe
+ MPA-tested: protects reliably against
pressurised water up to 10 bar!
+ Gas- and odour-tight – high-quality in terms of
TA-Air!
+ Radon tightness IAF tested - meets the
requirements for radon precautionary areas according to FHRK leaflet MB
101!
+ Tested according to FHRK test specification GE 101!
KRASO Sealing Insert Type Blind ED + DD + VD
blind plug, for pressing water, Torque Control Nut KRASO DKM, non-corrosive stainless steel V2A, single sealing, against pressing water up to 1 bar, 20 mm seal (KRASO Type Blind ED), double sealing, against pressing water up to 3 bar, 40 mm seal (KRASO Type Blind DD), quadruple sealing, against pressing water up to 8 bar, 80 mm seal (KRASO Type Blind VD), from DN 250 with central pressure distibution plate, low installation weight, simpler assembly, optimal pressure distribution | DafStB waterproof concrete guideline: Stress class 1 + 2
Simply just better+ For core drillings or casings+ KRASO Sealing Insert quality: 5 mm thick clamping plates made of non-corrosive stainless steel V2A, a specially developed rubber mixture with even better sealing characteristics, welded-on studs instead of through bolts, more studs for an even pressure distribution+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ Tested gas-tight according to DIN EN 13611 (chapter 7.12) proven by the DVGW research centre at the Engler-Bunte-Institute (EBI) of the Institute for Technology in Karlsruhe+ MPA-tested: protects reliably against pressurised water up to 10 bar!+ Gas- and odour-tight – high-quality in terms of TA-Air!+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101!+ Tested according to FHRK test specification GE 101!
KRASO Foil Clamping Flange Type FKF
for the sealing of media of all kinds of materials in front of a wall or in the core drilling, with foil flange 1,2 mm, according DIN 16937, oil- and bitumen resistant, surrounding approx. 15 cm, 30 mm seal | DIN 18533 W1 -E and W2.1 -E
The revolution in terms of the integration of media lines into the sealing of larger areas+ Innovative: water pressure tight sealing of any even and stable cable with our KRASO Foil Clamping Flange Type FKF foil flange!+ Suitable for all external diameters of media lines and for all materials!
+ We can individually customise the type of sealing sheets or foils: e.g. PVC, EPDM, FPO, RESITRIX®, PP, PE, KRASO-Fol, PYE-PV 200 S5 etc.
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ Metal components made of non-corrosive stainless steel V2A.
+ For new buildings and rehabilitation! Various designs for almost every situation!
+ Simple and fast mounting!
+ MPA-tested: water pressure tight up to 2,5 bar!+ Tested according to FHRK testing specification GE 101!+ DIN 18533 W1 -E and W2.1 -E
KRASO Foil Clamping Flange Type FKF DD/GR
for the sealing of media of all kinds of materials in front of a wall or in the core drilling, with foil flange 1,2 mm, according to DIN 16937, oil- and bitumen resistant, surrounding approx. 15 cm, 40 mm specially soft seal, central pressure distribution plate for even pressure distribution with corrugated media pipes, against pressing water up to 1 bar, Torque Control Nut KRASO DKM, non-corrosive stainless steel V2A
|
DIN 18533 W1 -E and W2.1 -E
The revolution in terms of the integration of media lines into the sealing of larger areas
+ Innovative: water pressure tight sealing of any even and stable cable with our KRASO Foil Clamping Flange Type FKF foil flange!+ Suitable for all external diameters of media lines and for all materials!+ We can individually customise the type of sealing sheets or foils: e.g. PVC, EPDM, FPO, RESITRIX®, PP, PE, KRASO-Fol, PYE-PV 200 S5 etc.+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ Metal components made of non-corrosive stainless steel V2A.+ For new buildings and rehabilitation! Various designs for almost every situation!+ Simple and fast mounting!+ MPA-tested: water pressure tight up to 2,5 bar!
+ Tested according to FHRK testing specification GE 101!+ DIN 18533 W1 -E and W2.1 -E
KRASO Foil Clamping Flange Type FKF Universal
for the sealing of media of all kinds of materials in front of a wall or in the ore drilling, with foil flange 1,2 mm, according DIN 16937, oil- and bitumen resistant, surrounding approx. 15 cm, 40 mm seal, against pressing water up to 1,5 bar, Torque Control Nut KRASO DKM, non-corrosive stainless steel V2A
|
DIN 18533 W1 -E and W2.1 -E
The revolution in terms of the integration of media lines into the sealing of larger areas+ Innovative: water pressure tight sealing of any even and stable pipe or cable with our KRASO Foil Clamping Flange FKF foil flange+ Suitable for all external diameters of media lines and for all materials!
+ We can individually customise the type of sealing sheets or foils: e.g. PVC, EPDM, FPO, RESITRIX®, PP, PE, KRASO-Fol, PYE-PV 200 S5 etc .
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ Metal components made of non-corrosive stainless steel V2A.
+ For new building and rehabilitation! Various designs for almost every situation!
+ Simple and fast mounting!
+ MPA-tested: water pressure tight up to 2,5 bar! + Tested according to FHRK testing specification GE 101!+ DIN 18533 W1 -E and W2.1 -E
KRASO PU 50
high-quality, permanently elastic and strong PU-sealant, also suitable on moist surface, recommended for all products with KRASO Foil Flange, colour black
KRASO Plastic Flange Plate Type KFP - split -
for installation of pipes or cables using a sealing insert (not included in the scope of supply), ID = InternalDiameter | DafStB waterproof concrete guideline: stress class 1 + 2
A proven solution reinvented+ Like a "split casing": The flange plate made of high-strength plastic can be installed retrospectively.
+ No core drilling: no need for the separation of media lines for installation!
+ Installation in front of a wall made of waterproof concrete (WU) or as KRASO Type KFP with foil flange in front of a wall with sealing of larger areas.
+ Easy installation by just one person thanks to the low weight!+ Latest CNC production technology: absolute dimensional compliance - no tolerances like they are are usual with solutions involving metal.
+ Tongue and groove system: the two halves of the plastic flange plate pull together with 100% accurate fit automatically. Installation errors are thus avoided due to this innovation!
+ Subsequent sealing of the media lines in the plastic flange plate using KRASO Sealing Insert.
+ DafStB waterproof concrete guideline: Stress class 1 + 2, with foil flange DIN 18533 W1 -E and W2.1 -E
KRASO Plastic Flange Plate Type KFP
for installation of pipes or cables using a sealing insert (not included in the delivery), no core drilling required, EPDM flat seal, ID = InternalDiameter
| DafStB waterproof concrete guideline: Stress class 1 + 2
The flange plate made of high-strength special plastic+ Due to changes in the groundwater level the rehabilitation of old buildings and the sealing of basements become necessary from time to time. Existing pipes and cables should also be sealed using the latest technology.
+ The sealing of the media lines inside the plastic flange plate is completed by using a split sealing insert.
+ DafStB waterproof concrete guideline: Stress class 1 + 2, with foil flange DIN 18533 W1 -E and W2.1 -E
KRASO Plastic Flange Plate Type KFP - multiple
for installation of pipes or cables using sealing insert (not included in the delivery), core drillings are not required, a simple opening or recess in the wall is enough, against pressing water up to 3,0 bar, plate made of 60 mm thick, high-strength special plastic, EPDM flat seal, ID = InternalDiameterKRASO Plastic Flange Plate Type KFP - multiple / multiple split+ The flange plate made of high-strength plastic can be installed retrospectively.
+ Installation in front of a wall made of waterproof concrete (WU) or in front of a wall with sealing of larger areas.
+ Subsequent sealing of the media lines in the plastic flange plate using KRASO Sealing Insert. Also available as split version!
KRASO Multi-Flange Plate Type MFP
for installation of pipes, sealing width to the media pipe or cable 20 mm, | DafStB waterproof concrete guideline: Stress class 1 + 2
Smart combination - innovative solution+ Combination of high-quality KRASO Sealing Insert and flange plate made of high-strength special plastic!+ Fast and easy installation thanks to the low weight - even by just one person!+ Installation in front of the waterproof (WU) concrete wall. EPDM flat seal, fixing material and adhesive and sealant KRASO PU 50 are included in the scope of supply.
+ For new buildings and rehabilitation! All kinds of media lines can also be installed or sealed retrospectively - easy and fast. Special designs can usually be produced and dispatched within 24 hours.
+ MPA-tested: water pressure tight up to 1,0 bar!+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!
+ DafStB waterproof concrete guideline: Stress class 1 + 2
KRASO Casing Type FL/ZA
fixed-loose flange for dowel-fixing, with casing, for installation of media pipes using a sealing insert (not included in the scope of supply), for buildings with exterior sealing ("black tank") according to DIN 18533. Available in non-corrosive stainless steel V2A or electrogalvanised, each with or without special coating ID = InternalDiameter | DIN 18533 W2.1 -E and W2.2 -EFixed-loose flange for dowel-fixing or for concreting and as sealing insert+ For buildings with exterior sealing ("black tank"): according DIN 18533 ( "sealing of below-ground structural elements").+ Each design available as separate types for pressing and non-pressing water+ Available in non-corrosive stainless steel V2A or V4A and in electrogalvanised steel+ Upon request available with special coating for buildings with thick coating (e.g. KMB)!
+ DIN 18533: water exposure class W2.1 -E and W2.2 -E
(“medium impact of pressing water“
(water column ≤ 3 metres)“ / „high impact of pressing water (water column ≥ 3 metres)“)
KRASO Casing Type FL/ZE
fixed-loose flange for concreting, with casing, for installation of media pipes using a sealing insert (not included in the scope of supply), for buildings with exterior sealing ("black tank") against pressing / non-pressing water according to DIN 18533. Available in non-corrosive stainless steel V2A or electrogalvanised with plastic casing, each with or without special coating ID = InternalDiameter | DIN 18533 W2.1 -E and W2.2 -E Fixed-loose flange for dowel-fixing or for concreting and as sealing insert
+ For buildings with exterior sealing (“black tank“): according to DIN 18533
(“sealing of below-ground structural elements“) + Each design available as separate types for pressing and non-pressing water + Available in non-corrosive stainless steel V2A or V4A and in electrogalvanised steel + Upon request available with special coating for buildings with thick coating (e.g. KMB)! + DIN 18533: water exposure classes W2.1 -E and W2.2 -E (“medium impact of pressing water“ - water column ≤ 3 metres / „high impact of pressing water" - water column ≥ 3 metres)
KRASO Sealing Insert Type FL
fixed-loose flange with KRASO Sealing Insert, for installation of media pipes, for buildings with exterior sealing ("black tank") according to DIN 18533. Available in non-corrosive stainless steel V2A or electrogalvanised, each with or without special coating, Torque Control Nut KRASO DKM | DIN 18533 W2.1 -E and W2.1 -EFixed-loose flange for dowel-fixing or for concreting and as sealing insert
+ For buildings with exterior sealing (“black tank“): according to DIN 18533
(“sealing of below-ground structural elements“) + Each design available as separate types for pressing and non-pressing water + Available in non-corrosive stainless steel V2A or V4A and in electrogalvanised steel + Upon request available with special coating for buildings with thick coating (e.g. KMB)! + DIN 18533: water exposure classes W2.1 -E and W2.2 -E (“medium impact of pressing water“ - water column ≤ 3 metres / „high impact of pressing water" - water column ≥ 3 metres)
KRASO Flange Plate stainless steel V2A
for installation of pipes or cables using a sealing insert (not included in the scope of supply), in front of a core drilling in concrete or masonry wall, made of non-corrosive stainless steel V2A, EPDM flat seal. ID = InternalDiameter | DafStB waterproof concrete guideline: Stress class 1 + 2
Available for an additional charge:
+ Split design
+ Fixed-loose flange construction according to DIN 18533
+ V4A
KRASO Flange Plate electrogalvanised
for installation of pipes or cables using a sealing insert (not included in the scope of supply), in front of a core drilling in concrete or masonry wall,
electrogalvanised steel, with welded tubular sleeve, EPDM flat seal. ID = InternalDiameter | DafStB waterproof concrete guideline: stress class 1 + 2Available for an additional charge:
+ Split design
+ Fixed-loose flange construction according
DIN 18533