- triple wall - specially made for precast factories -for installation into triple walls, thick-walled plastic - casing true diameter for concreting, as a recess for later installation of pipes or cables using KRASO Sealing Insert (not included in the delivery), water pressure tight surrounding KRASO 2 Seal on both sides (KRASO Type DFW/FE 4), KRASO 2 Seal on one side and central water pressure tight surrounding KRASO 4 Seal (KRASO Type DFW/FE 6), KRASO 2 Seal on both sides and central water pressure tight surrounding KRASO 4 Seal (KRASO Type DFW/FE 8), 2 KRASO Covers as an installation aid ID = InternalDiameter of true diameter casing | DafStB waterproof concrete guidline: Stress class 1 + 2 A simple and secure sealing of precast factories + Triple wall elements are standard today from a technical point of view and have many advantages that cannot be overlooked on the construction site. + Since two construction joints are produced transversely from the inner and outer shells and a core that has been cast in situ when making the wall, any water that occurs should be stopped at the outer shell. This prevents any slip or creepage of the pipe penetration. + Depending on the requirements and the loads involved in that particular case, we can offer in the form of our KRASO DFW Wall Penetrations a simple and tight solution to meet this challenge!+ DafStB waterproof concrete guidline: Stress class 1 + 2

thick-walled plastic casing - true diameter for concreting, with trowel flange on one side, roughened (KRASO Type FE/SF 5 - R) or tissue coated (KRASO Type FE/SF 5 - G) for the secure connection of bitumen thick coating (e.g. KMB), surrounding approx. 5 cm, with water pressure-, gas- and odour-tight surrounding KRASO 4 Seal and 2 KRASO Covers as an installation aidID = InternalDiameter true diameter casing| DafStB waterproof concrete guidline: Stress class 1 + 2 Thick-walled plastic casing - true diameter for the secure connection of bitumen thick coating+ Thick-walled true diameter plastic casing for concreting. + As a recess for later installation of pipes or cables using KRASO Sealing Insert.+ Approx. 5 cm surrounding trowel flange on one side, for a secure connection of bitumen thick coating as e.g. KMB: roughened or tissue coated.+ With water pressure tight as well as gas- and odour-tight, surrounding KRASO 4 Seal! MPA-tested: water pressure tight up to 10 bar!+ IAF tested: Radon-tight! prevents from a harmful to health concentration of the radioactive noble gas!+ Tested according to FHRK test specification GE 102!+ Also available: trowel flange made of PP with dovetail groove as KRASO Type FE/SF 5 - KG 2000 for the secure gripping of bitumen thick coating (e.g. KMB).+ DafStB waterproof concrete guidline: Stress class 1 + 2, DIN 18533 W1-E and W2.1-E

true diameter stainless steel casing with stainless steel bonding flange, surrounding approx. 12 cm, according DIN 18533, for concreting, made of non-corrosive stainless steel V2A, for installation of pipes or cables using KRASO Sealing Insert (not included in the delivery), with 2 KRASO Covers as an installation aid.ID = InternalDiameter true diameter casing| DIN 18533 W1 -E and W2.1 -ESimple intergation into the sealing of larger areas+ True diameter casing with surrounding bonding flange according DIN 18533 for a simple and fast integration into the sealing of larger areas (“black tank“). + As a recess for later installation of pipe or cables using KRASO Sealing Insert! + Available in non-corrosive stainless steel or with thick-walled true diameter plastic casing. + DIN 18533 W1 -E and W2.1 -E

thick-walled true diameter plastic casing with electrogalvanised bonding flange, surrounding approx. 12 cm, according DIN 18533, for concreting, for installation of pipes or cables using KRASO Sealing Insert (not included in the delivery), 2 KRASO Covers as an installation aidID = InternalDiameter true diameter casing | DIN 18533 W1 -E and W2.1 -E Simple intergation into the sealing of larger areas+ True diameter casing with surrounding bonding flange according DIN 18533 for a simple and fast integration into the sealing of larger areas (“black tank“). + As a recess for later installation of pipe or cables using KRASO Sealing Insert! + Available in non-corrosive stainless steel or with thick-walled true diameter plastic casing. + DIN 18533 W1 -E and W2.1 -E

Aussparung zum nachträglichen Einbau von Kabeln und Rohren mittels Dichteinsatz (nicht im Lieferumfang enthalten) • Kunststoff - Futterrohr Echtmaß mit Innenkern stabilisiert, mit Anbindeösen und Schubverzahnung sowie beiliegender Fixkralle als Einbauhilfe, ID = InnenDurchmesser Futterrohr Echtmaß | WU-Richtlinie: Beanspruchungsklasse 1 + 2Futterrohre, die überzeugen! + Dickwandiges Kunststoff-Futterrohr Echtmaß zum Einbetonieren + KRASO Vierstegdichtung – MPA-geprüft bis 10 bar! Gas- und geruchsdicht – hochwertig im Sinne der TA-Luft! + IAF-geprüft: Radondicht! + Geprüft nach FHRK-Prüfgrundlage GE 102! + Material und Verarbeitung: wetterbeständiger und schlagfester Kunststoff, KRASO Vierstegdichtung per Vulkanisierung monolithisch mit dem Kunststoffrohr verbunden + Jeder Durchmesser und jede Wandstärke ist kurzfristig lieferbar! Bei Bedarf kann die Größe auf der Baustelle individuell angepasst werden!+ Geringes Gewicht: leichte Handhabung, einfacher Einbau, geringe Transportkosten!+ Inklusive Einbaudeckeln! Eine Vorbehandlung ist nicht notwendig! + WU-Richtlinie: Beanspruchungsklasse 1 + 2

Fibre cement wall sleeve for installation in waterproof concrete structures for penetration of pipes and / or cables using KRASO Sealing Inserts | DafStB waterproof concrete guidline: Stress class 1 + 2 Water pressure tight penetration with homogeneous connection to concrete + Casing made of fibre cement as recess in waterproof concrete structures.+ For concreting: The surrounding external profiling ensures a homogeneous and water pressure tight connection to the concrete.+ MPA-tested up to 5 bar! + Radon tight – according to FHRK leaflet MB 101. + Corresponds to the expansion range ("expansion coefficient") of waterproof concrete. + Ready to immediately accept KRASO Sealing Inserts for covering with pipes and cables. + Optional: KRASO installation/formwork aid. + Fire protection class A1 according to DIN EN 13501-1 + DafStB waterproof concrete guideline: Stress class 1 + 2

stainless steel casing for concreting, as a recess for later installation of pipes or cables using KRASO Sealing Insert (not included in the delivery), made of non-corrosive stainless steel V2A, with water pressure-, gas- and odour-tight, surrounding KRASO 4 Seal and 2 KRASO Covers as an installation aidID = InternalDiameter true diameter casing | DafStB waterproof concrete guidline: Stress class 1 + 2 Convincing casings! + Stainless steel casing for concreting: as a recess for later installation of pipe or cables using KRASO Sealing Insert! + With water pressure tight surrounding KRASO 4 Seal: due to the special geometry our surrounding 4 seal produces a grip with the concrete that is water-, gas- and odour-tight.+ Flexibility: we offer KRASO Casings in a wide variety of different formats. Varying diameters or wall thicknesses are available on short-term notice! If necessary, the size can be adapted individually on the construction site! + Weight: low weight, and hence easy handling on the construction site and low transport costs! + Scope of supply: KRASO Casings are supplied complete with installation covers! + Installation: simple installation thanks to low weight and KRASO Covers as installation aid. No pre-treatment is required. + We offer the matching KRASO Sealing Inserts for all KRASO Casings. + DafStB waterproof concrete guidline: Stress class 1 + 2, DIN 18533 W1-E and W2.1-E

stainless steel tubular sleeve for concreting, as non-water pressure tight recess for later installation of pipes or cables using KRASO Sealing Insert (not included in the delivery), made of non-corrosive stainless steel V2AID = InternalDiameter true diameterConvincing casings!+ Stainless steel casing for concreting: as a recess for later installation of pipe or cables using KRASO Sealing Insert! + Flexibility: we offer KRASO Casings in a wide variety of different formats. Varying diameters or wall thicknesses are available on short-term notice! If necessary, the size can be adapted individually on the construction site! + Weight: low weight, and hence easy handling on the construction site and low transport costs! + Scope of supply: KRASO Casings are supplied complete with installation covers! + Installation: simple installation thanks to low weight and KRASO Covers as installation aid. No pre-treatment is required. + We offer the matching KRASO Sealing Inserts for all KRASO Casings.

- stainless steel/ casing true diameter/ middle flange -stainless steel casing for concreting with middle flange, surrounding approx. 10 cm, as a recess for later installation of pipes and cables using KRASO Sealing Insert (not included in the delivery), made of non-corrosive stainless steel V2A ID = InternalDiameter true diameter casingConvincing casings!+ Stainless steel casing for concreting: as a recess for later installation of pipe or cables using KRASO Sealing Insert! + Flexibility: we offer KRASO Casings in a wide variety of different formats. Varying diameters or wall thicknesses are available on short-term notice! If necessary, the size can be adapted individually on the construction site! + Weight: low weight, and hence easy handling on the construction site and low transport costs! + Scope of supply: KRASO Casings are supplied complete with installation covers! + Installation: simple installation thanks to low weight and KRASO Covers as installation aid. No pre-treatment is required. + We offer the matching KRASO Sealing Inserts for all KRASO Casings.

thick-walled true diameter plastic casing for retrofit installation of pipes and cables using KRASO Sealing Insert (not ioncluded in the delivery), with formed KRASO Foil Flange, oil- and bitumen resistant, surrounding approx. 15 cm. For the integration of the foil flange we recommend our adhesive and sealant KRASO PU 50.ID = InternalDiameter Flange Pipe Type FE | DIN 18533 W1-E and W2.1-E Simple and effective integration into bituminous sealing + For new building and rehabilitation - according DIN 18533 W1-E and W2.1-E. + Simple and effective integration into bituminous sealing („black tank“): bitumen thick coating (e.g. KMB) and sheeting, concrete and brick wall. + Water pressure tight up to 1,5 bar – MPA-tested! + Made of dimensionally and pressure stable solid wall material with low abrasion! Easy to install at low temperatures.

high-quality, permanently elastic and strong PU-sealant, also suitable on moist surface, recommended for all products with KRASO Foil Flange, colour black