KRASO Builder´s Convenience Box - wall - ESH
KRASO Builder´s Convenience Box - wall - ESH
Convenient, safe, securely attached to the network - single house connection for buildings with a basement for gas, water, electricity or telecommunication
+ Simple and safe single-house connection for new buildings and rehabilitation on buildings with a basement.
+ Flexible installation: Gas, water, electricity, telecommunication - including a suitable installation or mounting set.
+ Double installation also possible: Electricity and telecommunication!
+ DVGW-certified according VP 601: overall system is gas- and water pressure tight up to 1 bar!
+ For core hole DN 100 (99 - 103 mm). One for all: precast walls, in situ concrete walls, casings and core holes.
+ For wall thicknesses 160 - 500 mm.
+ Tight in waterproof concrete structures in stress class 1 (standing or occasionally pressing water).
+ External sealing element with flange according DIN 18533! Seal: 80 mm.
+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101! Resistant to methane gas!
+ Gas and odour-tight - high-quality according TA-Air!
+ Splited end plugs for easy installation!
+ Including extension set.
+ Simple and safe single-house connection for new buildings and rehabilitation on buildings with a basement.
+ Flexible installation: Gas, water, electricity, telecommunication - including a suitable installation or mounting set.
+ Double installation also possible: Electricity and telecommunication!
+ DVGW-certified according VP 601: overall system is gas- and water pressure tight up to 1 bar!
+ For core hole DN 100 (99 - 103 mm). One for all: precast walls, in situ concrete walls, casings and core holes.
+ For wall thicknesses 160 - 500 mm.
+ Tight in waterproof concrete structures in stress class 1 (standing or occasionally pressing water).
+ External sealing element with flange according DIN 18533! Seal: 80 mm.
+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101! Resistant to methane gas!
+ Gas and odour-tight - high-quality according TA-Air!
+ Splited end plugs for easy installation!
+ Including extension set.
+
DafStB waterproof concrete guidline: Stress class 1 + 2, DIN 18533 W1 -E and W2.1 -E
Info
Scope of supply:
KRASO Builder’s Convenience Box - wall - ESH including
• internal sealing element with pre-installed casing pipe incl. protective cover for the installation of supply lines like gas, water, electricity, telecommunication
- external sealing element
- installation instruction KRASO BKP - wall - ESH
- folding rule
• KRASO BKP - wall - ESH - extension set including
- double sleeve DN 75
- 2 x sealing ring
- lubricant
as wall as one of the following optionally available installation sets of BKP gas installation kits:
- KRASO BKP - Sealing Insert - electricity/water -
with steppless ring technology 26 - 50 mm or blind
- primary sealing + secondary sealing for electricity/water
- casing pipe end plugs consisting of
· end plug electricity/water - split -
· hose connection 80
- KRASO BKP - Sealing Insert - telecommunication -
clamping range: 5 - 13 mm, 3 x 7 - 13 mm, 13 - 21 mm
- primary sealing + secondary sealing for telecommunication
- casing pipe end plugs consisting of
· end plugs for telecommunication - split -
· hose connection 80
- KRASO BKP - Sealing Insert - electricity + telecommunication -
clamping range: electricity 25 - 36 mm / telecommunication
2 x 5 - 10 mm, 3 x 7 - 14 mm
- primary sealing + secondary sealing for electricity + telecommunication
- casing pipe end plugs consisting of
· end plugs for electricity + telecommunication
· hose connection 80
- tube of lubricant
• Schuck DN 25 consists of primary and secondary sealing as well as gas end plug
• RMA DN 25 consists of primary and secondary sealing as well as gas end plugKRASO Builder’s Convenience Box - wall - ESH including
• internal sealing element with pre-installed casing pipe incl. protective cover for the installation of supply lines like gas, water, electricity, telecommunication
- external sealing element
- installation instruction KRASO BKP - wall - ESH
- folding rule
• KRASO BKP - wall - ESH - extension set including
- double sleeve DN 75
- 2 x sealing ring
- lubricant
as wall as one of the following optionally available installation sets of BKP gas installation kits:
- KRASO BKP - Sealing Insert - electricity/water -
with steppless ring technology 26 - 50 mm or blind
- primary sealing + secondary sealing for electricity/water
- casing pipe end plugs consisting of
· end plug electricity/water - split -
· hose connection 80
- KRASO BKP - Sealing Insert - telecommunication -
clamping range: 5 - 13 mm, 3 x 7 - 13 mm, 13 - 21 mm
- primary sealing + secondary sealing for telecommunication
- casing pipe end plugs consisting of
· end plugs for telecommunication - split -
· hose connection 80
- KRASO BKP - Sealing Insert - electricity + telecommunication -
clamping range: electricity 25 - 36 mm / telecommunication
2 x 5 - 10 mm, 3 x 7 - 14 mm
- primary sealing + secondary sealing for electricity + telecommunication
- casing pipe end plugs consisting of
· end plugs for electricity + telecommunication
· hose connection 80
- tube of lubricant
• Schuck DN 25 consists of primary and secondary sealing as well as gas end plug
• Voigt DN 25 consists of primary and secondary sealing as well as gas end plug
• Voigt DN 32 consists of primary and secondary sealing as well as gas end plug
Downloads
Produktinformation
Datenblatt
Prüfzeugnis
Montageanleitung
-
Produktinfo_KRASO_bkp_wand_esh (3.43 MiB)
-
Prüfbericht_KRASO_BKP_Wand_ESH (382.55 KiB)
-
Prüfbericht_KRASO_BKP_Dichteinsatz (605.72 KiB)
-
montageanleitung_kraso_bkp_wand_esh (2.87 MiB)
|
Type / Item |
KRASO BKP - wall - ESH |
|
Wall thickness from ... to ... |
160 - 500 mm |
|
Diameter casing or core hole min ... max ... |
99 - 103 mm |
|
Whole system length |
630 mm |
|
Length x width internal sealing element |
120 x 120 mm |
|
Seal width internal sealing element |
40 mm |
|
Diameter external sealing element with flange seal |
160 mm |
|
Seal width external sealing element with flange seal |
80 mm |
|
Internal diameter casing pipe |
68 mm |
|
External diameter casing pipe |
75 mm |
KRASO Cable Inlet Box System KDS 150
for the installation of cables and lines as for example water, electricity, telecommunication etc. into buildings without basement, with water pressure tight surrounding KRASO 4 Seal | DafStB waterproof concrete guidline: Stress class 1 + 2, optional with trowel flange DIN 18533 W1 -EThe flexible system for industry and commercial buildings+ KRASO Cable Inlet Box System KDS 150 offers you a secure and simple possibility to install cables and pipes right into buildings. Together with the KRASO Cable Penetration System KDS 150 this flexible system offers plenty of combinations. With a radius of 650 mm or 1000 mm you are able to connect pipes and cable protective hoses at a 90-degree angle to buildings without basements.+ Due to the variable plug-in system the KRASO Cable Inlet Box System KDS 150 can be combined to many different sizes - according your requirements.
+ For the installation of lines as e.g. water, electricity, telecommunication etc. into buildings without basement: the ideal solution for industrial and commercial buildings.
+ Sealing of the base plate by water pressure tight surrounding KRASO 4 Seal.
+ With stable installation device for correct positioning before concreting.
+ Flexible plug-in possibilities from the outside due to KRASO Cable Penetration System KDS 150.
+ Additional media line sealing from the inside using KRASO Sealing Inserts.
+ Including: KRASO KDS 150 Empty Pipe Insert with bayonet fitting for a floor construction with floor heating, insulation and screed. + DafStB waterproof concrete guidline: Stress class 1 + 2, optional with trowel flange DIN 18533 W1 -E
Cable Inlet Box KDS 150 - special
bending radius approx. 200 cm, for the secure connection of supply lines like e.g. water - electricity - telecommunication into buildings without basement. With installation device, empty pipe extension 20 cm and water pressure tight surrounding KRASO 4 Seal and 2 KRASO KDS Closure Covers
KRASO Y-Wrench
Y-Wrench to open / close the KDS closure cover, available for KRASO Cable Penetration KDS 90 and KDS 150Appropriate accessories for KRASO Cable Penetration KDS and Cable Inlet Box KDS 150
+ With the appropriate accessories KRASO Cable Penetration KDS 90 / KDS 150 and KRASO Cable Inlet Box System KDS 150 can be combined to a complete and individual system - as it is required for demanding construction projects.+ Our experts are happy to assist you regarding the numerous possibilities - even on your construction site!
KRASO FLS - Flexible Empty Pipe System
flexible empty pipe-system as a cable protective hose for gas- and water tight connection to KRASO Cable Penetration KDS, over-pressures of 4,0 and 3,0 bar respectively, under-pressures of 0,7 and 0,5 bar respectively, heavy version for severe mechanical stresses, with a smooth interior for smooth cable pulling, and a smooth exterior for optimal sealing, flexible, enhanced pressure and vacuum resistance, high axial resistance, resistant to alkalis and acids, resistant to brine and sea water, good UV and ozone resistance, gas-tight and liquid-tight, RoHS-compliant (Restriction of Hazardous Substances)Appropriate accessories for KRASO Cable Penetration KDS and Cable Inlet Box KDS 150+ With the appropriate accessories KRASO Cable Penetration KDS 90 / KDS 150 and KRASO Cable Inlet Box System KDS 150 can be combined to a complete and individual system - as it is required for demanding construction projects.+ Our experts are happy to assist you regarding the numerous possibilities - even on your construction site!
