KRASO BKP - Sealing Inserts
KRASO BKP - Sealing Inserts
installation kits for KRASO Builder's Convenience Box - floor - SET and KRASO Builder's Convenience Box - wall, wall - NFE and wall - ESH: electricity/water, telecommunication,
electricity +
telecommunication. Tested in accordance with DVGW!
Sealing insert including
Sealing insert including
- Primary sealing electricity/water for internal installation of the electricity cable or water pipeline. Clamping range: 26 - 50 mm
- Secondary sealing electricity/water for internal installation of electricity cable or water pipeline
Casing pipe end plug (optional) including
- End plug electricity/water - split - for external installation of electricity cable or water pipeline
- Hose connection 90/75 for KRASO BKP - floor - SET for the connection with the casing pipe and fitting of the end plug for electricity/water - split -
- Hose connection 80 for KRASO BKP - wall for the connection with the casing pipe and fitting of the end plug for electricity/water - split -
Info
From 05-01-2026: price increase + 4.7%
Scope of supply:
as an installation kit for electricity/water, KRASO BKP - Sealing Insert, including primary sealing and secondary sealing, optionally available casing pipe end plugs including end plug and hose connection 90/80 (floor) or hose conncetion 80 (wall)
Downloads
|
Item |
- electricity/water - |
- telecommunication - |
- electricity + telecommunication - |
|
KRASO BKP - Sealing Insert |
54 € |
||
|
Casing pipe end plug (optional) |
32 € |
||
KRASO Y-Wrench
Y-Wrench to open / close the KDS closure cover, available for KRASO Cable Penetration KDS 90 and KDS 150Appropriate accessories for KRASO Cable Penetration KDS + Cable Inlet Box System KDS 150
+ With the appropriate accessories, KRASO Cable Penetration KDS 90 / KDS 150 wall penetrations and KRASO Cable Inlet Box System KDS 150 can be combined to a complete individual system - as it is required for challenging construction projects.+ Our experts are happy to assist you regarding the numerous possibilities - even on your construction site!
KRASO FLS - Flexible Empty Pipe System
flexible empty pipe-system as a cable protective hose for gas- and water tight connection to KRASO Cable Penetration KDS, over-pressures of 4 and 3 bar, under-pressures of 0.7 and 0.5 bar , heavy design for high mechanical load, smooth interior for smooth cable pulling, smooth exterior for optimal sealing, flexible, enhanced resistance against pressure and vacuum, high axial resistance, resistant to alkalis and acids, resistant to brine and sea water, good UV and ozone resistance, gas-tight and liquid-tight, RoHS-compliant (Restriction of Hazardous Substances)KRASO KDS - Accessories for KRASO Cable Penetration KDS + Cable Inlet Box KDS 150+ With the appropriate accessories, KRASO Cable Penetration KDS 90 / KDS 150 as wall penetrations and KRASO Cable Inlet Box System KDS 150 can be combined to a complete individual system - as it is required for challenging construction projects.+ Our experts are happy to assist you regarding the numerous possibilities - even on your construction site!
KRASO Builder‘s Convenience Box - floor - SET
multi utility connection for supply lines (gas, water, electricity, telecommunication) for buildings without basement incl. KRASO FLS 90, incl. installation kits for electricity/water (2 x), telecommunication, electricity + telecommunication as standard configuration for KRASO BKP - floor - SET - 4-fold, desired configuration for the KRASO BKP
- floor - SET - 5-fold, 3-fold, 2-fold, 1-fold, KRASO BKP Gas Installation Kits are optionally available | DafStB waterproof concrete guideline: stress class 1 + 2, DIN 18533 W1.1 -EThe multi utility connection with integrated installation kit+ The convenient solution for builders: safe and tight installation of gas, water, electricity and telecommunication lines into buildings without basement!+ DVGW-certified according to VP 601:
overall system is gas- and water pressure tight up to 1 bar! Gas- and odour-tight – high-quality in terms of TA-Air+ Radon-tight! Resistant to methane gas!+ KRASO 4 Seal: exterior sealing of concrete: 10 bar! Overall system is gas- and water pressure tight up to 1 bar!+ Simple installation due to stable installation device and visual check of the snap-on-socket - helps to avoid installation errors+ Hose diameter: external 90 mm - internal 80 mm+ With integrated installation kit: ready-assembled components for the utility connection of electricity, water and telecommunication lines, including floor screed insert and height fixation. No need to pass on the installation kit to other installers.+ For flush-mount installation in the base plate - no tripping hazards, no wall damages! Including building period installation cover+ Easy integration of vapour barrier foils due to the roughened trowel flange!
+
Height-adjustable base plate and floor screed
+ KRASO BKP Gas Installation Kits optionally available+ Split end plugs for easy installation!+ Including extension set!+ DafStB waterproof concrete guideline: stress class 1 + 2, DIN 18533 W1.1 -E
KRASO Builder's Convenience Box - wall
multi utility connection for supply lines (gas, water, electricity, telecommunication) for buildings with basement, KRASO BKP Gas Installation Kits optionally available | DafStB waterproof concrete guideline: stress class 1 + 2, DIN18533 W1 -E and W2.1 -E Multi utility connection for buildings with basement: gas, water, electricity and telecommunication+ DVGW-certified according VP 601: complete system is gas- and water pressure tight up to 1 bar!+ For core drilling and casing DN 200 (199 - 203 mm). For precast walls and in-situ concrete walls!+ External sealing element with sealing flange according to DIN 18533! Seal width: 80 mm+ Tight in waterproof concrete structures with stress class 1 (permanently or temporarily pressing water)+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101! Resistant to methane gas!+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ Split end plugs for easy installation!+ Ready for the network connection of gas, water, electricity and telecommunication: tested in accordance with DVGW! Including KRASO BKP - Sealing Inserts for electricity/water, telecommunication, electricity + telecommunication+ Optionally available KRASO BKP Gas Installation Kits:
• gas utility connection Schuck DN 25
• gas
utility
connection RMA DN 25 • gas
utility
connection Voigt DN 25 • gas
utility
connection Voigt DN 32+ Including KRASO BKP - wall - Extension Set!+ DafStB waterproof concrete guideline: stress class 1 + 2, DIN 18533 W1 -E and W2.1 -E
KRASO Builder's Convenience Box - wall - SWP
single utility connection for control cables and refrigerant lines of air-water heat pumps (split) for buildings with basement | DafStB waterproof concrete guideline: stress class 1 + 2, DIN 18533 W1 -E and W2.1 -EUtility connection for air- water- heat pumps (split)+ Simple and safe single utility connection for new buildings and rehabilitation of buildings with a basement+ For core drilling and casing DN 150 (149 - 153 mm). For precast walls, in-situ concrete walls and brickwork, for wall thicknesses 160 - 500 mm+ External sealing element with sealing flange according to DIN 18533! Seal width: 80 mm+ With KRASO Sealing Insert Type SWP with large flange for internal installation.Scope of application:For control cables, closed: stepless onion ring technology 2 x 5 - 18 mm, with plugFor refrigerant lines, split:- onion ring technology 1 x 6 - 13 mm for 1/4 or 3/8 inch lines, with plug- onion ring technology 1 x 6 - 18 mm for 1/4, 3/8, 1/2 or 5/8 inch lines, with plug+ Radon tightness IAF tested - according to FHRK leaflet MB 101!
+ DafStB waterproof concrete guideline: stress class 1 + 2, DIN 18533 W1 -E and W2.1 -E
KRASO Builder's Convenience Box - wall - NFE
multi utility connection for supply lines (local, district or geothermal heating, water, electricity, telecommunication) for buildings with basement | DafStB waterproof concrete guideline: stress class 1 + 2, DIN 18533 W1 -E and W2.1 -EComfortable connection to your basement: heat pump, local, district or geothermal heating + Heat pump or local, district or geothermal heating system each with supply and reflux!+ For heat pumps or local, district or geothermal heating lines with diameter 110, 90, 75, 50, 40 or 32 mm, optionally available with a diameter of 125 mm+ For core drilling and casing DN 300 (299 - 303 mm). For precast walls and in-situ concrete walls! + External sealing element with sealing flange according to DIN 18533! Seal width: 90 mm+ Gas- and odour tight - high quality in terms of TA-Air!+ Certified up to 1 bar!+ Radon tightness IAF tested - according to FHRK leaflet MB 101! Resistant to methane gas!+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ Including all components for a secure grid connection of heat pump, local, district or geothermal heating, water, electricity and telecommunication!+ Including casing pipe end plugs - warm bridges are avoided!+ Optionally available: KRASO BKP - wall - NFE - Extension Set - for cable protective hoses, KRASO FLS or rigid casing pipes!+ DafStB waterproof concrete guideline: stress class 1 + 2, DIN 18533 W1 -E and W2.1 -E
Häufig gestellte Fragen (FAQ)
Was sind KRASO BKP Dichteinsätze?
Die KRASO BKP Dichteinsätze sind Installationssets zur sicheren Abdichtung von Versorgungsleitungen innerhalb der KRASO Bauherren-Komfortpakete. Sie sorgen für eine gas- und wasserdichte Durchführung von Strom-, Wasser- und Telekommunikationsleitungen.
Welche Varianten der KRASO BKP Dichteinsätze gibt es?
Die Dichteinsätze sind als Installationsset erhältlich für:
- Strom/Wasser
- Telekommunikation
- Strom + Telekommunikation
Damit lassen sich die Hauseinführungen flexibel und bedarfsgerecht belegen.
Welche Leitungsdurchmesser können abgedichtet werden?
Der Dichteinsatz Strom/Wasser verfügt über eine stufenlose Scheibentechnik mit einem Spannbereich von 26 bis 50 mm.
Telekommunikationsleitungen werden über speziell angepasste Dichtungselemente sicher abgedichtet.
Aus welchen Komponenten besteht ein KRASO BKP Dichteinsatz?
Ein Dichteinsatz besteht aus:
- Primärdichtung zur innenseitigen Abdichtung der Leitung
- Sekundärdichtung zur zusätzlichen Sicherheit
Optional ist ein Mantelrohrendstopfen erhältlich.
Wofür wird der optionale Mantelrohrendstopfen verwendet?
Der Mantelrohrendstopfen dient der außenseitigen Abdichtung des Mantelrohrs und besteht aus:
- geteiltem Endstopfen
- Schlauchverbinder 90/75 für Boden-BOX
- Schlauchverbinder 80 für Wand-Systeme
Sind die KRASO BKP Dichteinsätze geprüft und zugelassen?
Ja. Die Dichteinsätze sind nach DVGW geprüft und erfüllen damit hohe Anforderungen an Sicherheit, Dichtheit und Qualität.
Können die Dichteinsätze auch nachträglich eingesetzt werden?
Ja. Die KRASO BKP Dichteinsätze eignen sich sowohl für die Erstmontage als auch für den nachträglichen Austausch oder die Umrüstung bestehender Belegungen innerhalb des Bauherren-Komfortpakets.
Für wen sind die KRASO BKP Dichteinsätze besonders geeignet?
Die Dichteinsätze sind ideal für Bauherren, Installateure und Planer, die eine normgerechte, geprüfte und flexible Abdichtungslösung für Hausanschlüsse benötigen.
Warum sollte man originale KRASO BKP Dichteinsätze verwenden?
Originale KRASO Dichteinsätze sind optimal auf die KRASO Bauherren-Komfortpakete abgestimmt, geprüft nach DVGW und gewährleisten eine dauerhaft dichte und sichere Hauseinführung – entwickelt von KRASO.