KRASO System Cover KDS 150 - heat-shrink technology
KRASO System Cover KDS 150 - heat-shrink technology
incl. bayonet fitting with union nut and anti-twist lock (prevents unintentional opening), with 1, 3 or 7 adapters for installation of pipes or cables, incl. heat-shrink hose (length approx. 20 cm), connection via heat-shrink technology, KRASO System Cover KDS 150 - heat-shrink technology - 3-fold and 7-fold with factory-installed, water pressure tight cover, simple opening by knocking off before installation (on-site), scope of application in the table below | DafStB waterproof concrete guideline: stress class 1 + 2
Appropriate accessories for KRASO Cable Penetration KDS + Cable Inlet Box System KDS 150
+ With the appropriate accessories, KRASO Cable Penetration KDS 90 / KDS 150 as wall penetration and KRASO Cable Inlet Box System KDS 150 can be combined to a complete individual system - as it is required for challenging construction projects.
+ Our experts are happy to assist you regarding the numerous possibilities - even on your construction site!
Info
Scope of supply:
KRASO System Cover KDS 150 - heat-shrink technology - 1-fold, 3-fold, 7-fold with heat-shrink hose/shrink hoses
KRASO System Cover KDS 150 - heat-shrink technology - 1-fold, 3-fold, 7-fold with heat-shrink hose/shrink hoses
Further diameters available on request!
Downloads
KRASO System Cover KDS 150 - heat-shrink technology
|
Type / Item |
System Cover KDS 150 1-fold |
System Cover KDS 150 3-fold |
System Cover KDS 150 7-fold |
|
Diameter pipe or cable |
1 x 34 - 115 |
3 x 22 - 59 |
7 x 13 - 33 |
|
KRASO System Cover KDS 150 |
96 € |
105 € |
118 € |
KRASO KDS 150 double wall penetration - 45 degrees -
with pre-installed clamps and styrofoam holders for installation at an angle of 45° | DafStB waterproof concrete guideline: stress class 1 + 2Compatible, tight, secure - the double wall penetration system
+ Compatible with all other current systems! Tight due to the water pressure tight surrounding KRASO 4 Seal! Secure due to break-resistant solid wall material!
+ The intelligent, all-purpose and flexible cable penetration system for complex new buildings:
public buildings, hospitals, technical-scientific institutions or in the industrial and commercial sector+ Horizontal and vertical combination possible, installation at an angle of 45° with pre-installed clamps possible, also available for precast walls or as integration into the sealing of larger areas+ Matching accessories for every purpose!
+ DafStB waterproof concrete guideline: stress class 1 + 2
KRASO Cable Penetration FBV-KDS as double wall penetration
cable penetration system for concreting | DafStB waterproof concrete guideline: stress class 1 + 2
Double wall penetration as FBV system
+ Cable penetration for the compliant integration of fresh concrete composite films+ Independent from the manufacturer: fresh concrete composite films (FBV) of all manufacturers can be integrated at the factory+ KRASO FBV Sealing Flange made of non-corrosive stainless steel V2A with 20 cm surrounding, square fresh concrete composite film+ Compatible with all other current systems! Tight due to the water pressure tight surrounding KRASO 4 Seal! Secure due to break-resistant wall material!
+ The intelligent, all-purpose and flexible cable penetration system for complex construction projects:
public buildings, hospitals, technical-scientific institutions or in industrial and commercial sectors+ With plug-in system on both sides for forming packages!
+ DafStB waterproof concrete guideline: stress class 1 + 2
Legend
Regarding our wall and pipe penetrations the KRASO 4 Seal reliably keeps pressurised water out: The material testing institute certifies a water pressure tightness up to 10 bar! Due to its construction the KRASO 4 Seal is securely fixed to the concrete. It is joined to the solid wall pipe monolithically (force-fit) in a special process. This completely prevents any creep or slippage.
Whether KRASO Pump Sumps made of concrete, Flange Plates, Tie Points or Sealing Inserts: they all offer reliable protection against pressing water due to their construction, material and processing. All these products have been tested by independent material testing institutes regarding their water pressure tightness and are proof against pressurised water up to 10 bar!
Not only against pressing water — KRASO Sealing Inserts are additionally gas- and odour-tight and therefore high-quality in terms of TA-Air! Due to a successful proof in a material testing institute our sealing inserts include the administrative regulation of the Federal Immission Control Act: “Technical Instructions on Air Quality Control TA-Air”.
Products with Torque Control Nut KRASO DKM can be installed without having to use a torque wrench. The correct torque moment is integrated in the KRASO DKM. The installation has never been so easy and installation errors can be avoided.
Radon (Rn) is a radio-active noble gas which develops in rock earth. Via ground air this colour- and odourless gas can enter basement rooms through leakages. Radon is the second most common cause for lung cancer. Pipe penetrations with KRASO 4 Seal and KRASO Sealing Inserts are gas tight and therefore reliably protect your building against the intrusion of radon.
The DVGW — The German Technical and Scientific Association for Gas and Water - certified that KRASO Sealing Inserts are gas-tight according to DIN EN13611 (sector 7.2). Our sealing inserts therefore meet the criteria for the German Association for Gas and Water.
The KRASO Builder's Convenience Box has the application from DVGW - German Technical and Scientific Association for Gas and Water - according DVGW VP 601 as house connection for gas and water and therefore fulfils all directives for a gas- and water pressure tight installation.
The so-called “fire-resistance grading” gives information about the DIN normed fire resistance of building materials. The grading shows the letter ”F” along with the time span of the functional integrity in minutes. With 180 minutes of functional integrity the fire-resistance grading F 180 therefore stands for a highly- fire-resistant material.
The “general building authority test certificate” (abP) and the “general building authority approval” (abZ) ensure compliance with building regulations and the usability of building products based on state building regulations or the model building regulations.
KRASO Products with a "FHRK Quality" – icon meet the testing specifications of FHRK e.V. - the trade association for house connections for pipes and cables. The tests cover all possible stresses on sealing inserts, house connection systems, pipe penetrations and casings: for example, gas- and water pressure tightness, abrasion resistance when backfilling formwork or resistance when compacting the building pit.
KRASO Products with the icon "FHRK Radondicht" have been tested according FHRK or/and DVGW testing specifications regarding their gas- and water pressure tightness and have also been successfully tested for diffusion resistance by the IAF. Products with this seal are radon-tight!