KRASO FLS - Flexible Empty Pipe System
KRASO FLS - Flexible Empty Pipe System
flexible empty pipe-system as a cable protective hose for gas- and water tight connection to KRASO Cable Penetration KDS, over-pressures of 4 and 3 bar, under-pressures of 0,7 and 0,5 bar , heavy design for high mechanical load, smooth interior for smooth cable pulling, smooth exterior for optimal sealing, flexible, enhanced resistance against pressure and vacuum, high axial resistance, resistant to alkalis and acids, resistant to brine and sea water, good UV and ozone resistance, gas-tight and liquid-tight, RoHS-compliant (Restriction of Hazardous Substances)
+ With the appropriate accessories, KRASO Cable Penetration KDS 90 / KDS 150 as wall penetrations and KRASO Cable Inlet Box System KDS 150 can be combined to a complete individual system - as it is required for challenging construction projects.
Appropriate accessories for KRASO Cable Penetration KDS + Cable Inlet Box KDS 150
+ With the appropriate accessories, KRASO Cable Penetration KDS 90 / KDS 150 as wall penetrations and KRASO Cable Inlet Box System KDS 150 can be combined to a complete individual system - as it is required for challenging construction projects.
+ Our experts are happy to assist you regarding the numerous possibilities - even on your construction site!
Info
Downloads
KRASO FLS - Flexible Empty Pipe System
|
Type / Item |
KRASO FLS 90 |
KRASO FLS 110* |
KRASO FLS 150* ** |
|
InternalDiameter ID in mm |
80 |
101 |
150 |
|
External diameter in mm |
88 |
113 |
163 |
|
Bending radius in mm |
200 |
350 |
600 |
|
Weight in kg/m approx. |
1,5 |
2,9 |
4,3 |
|
Material thickness in mm |
4 |
6 |
6,5 |
|
Compression resistance |
629 N |
1520 N |
936 N |
|
Classification according to DIN EN 61386-24 |
N250 (reached test force F: 364 N) |
N250 (reached test force F: 293 N) |
N250 (reached test force F: 388 N) |
|
Stock length in m |
30 |
30 |
25 |
|
KRASO FLS |
23 € per metre |
35 € per metre |
45 € per metre |
|
Cutting cost*** |
17 € |
23 € |
- |
|
* Order minimum 10 m, ** Freight charges for KRASO FLS 150 only on request *** No discount applicable |
|||
Cable Inlet Box KDS 150 - special
bending radius approx. 200 cm, for the secure connection of supply lines like e.g. water - electricity - telecommunication into buildings without basement. With installation device, empty pipe extension 20 cm and water pressure tight surrounding KRASO 4 Seal and 2 KRASO KDS Closure Covers
KRASO Cable Inlet Box System KDS 150
for the installation of cables and utility lines such as e.g. water - electricity - telecommunication etc. in buildings without basement. Attention: do not use a KRASO System Sealing Insert KDS 150 for the sealing of media lines, but use KRASO Sealing Inserts instead! | DafStB waterproof concrete guideline: stress class 1 + 2, with optional trowel flange DIN 18533 W1 -EThe flexible system for industry and commercial buildings+ The secure and reliable way for the installation of cables and pipes right into buildings: with a radius of 650 mm or 1000 mm, main pipes and cable protective hoses can be connected at a 90-degree angle to buildings without basement+ KRASO Cable Penetration System KDS 150: flexible and combinable in various ways+ The KRASO Cable Inlet Box System KDS 150 can be expanded to any number of rows thanks to the plug-in system - depending on your requirements!+ For the installation of cables and pipes such as water, electricity, telecommunication etc. into buildings without a basement: the perfect solution for industrial and commercial buildings!+ Sealing of the base plate by water pressure tight surrounding KRASO 4 Seal+ With stable installation device for correct positioning before concreting+ Flexible plug-in possibilities on the outer side using KRASO Cable Penetration System KDS 150+ Additional media pipe sealing from the inside using KRASO Sealing Inserts+ Included in the scope of supply: KRASO KDS 150 Empty Pipe Insert with bayonet fitting for a floor construction with floor heating, insulation and screed+ DafStB waterproof concrete guideline: stress class 1 + 2, with optional trowel flange DIN 18533 W1 -E
KRASO KDS 150 double wall penetration - 45 degrees -
with pre-installed clamps and styrofoam holders for installation at an angle of 45° | DafStB waterproof concrete guideline: stress class 1 + 2Compatible, tight, secure - the double wall penetration system
+ Compatible with all other current systems! Tight due to the water pressure tight surrounding KRASO 4 Seal! Secure due to break-resistant solid wall material!
+ The intelligent, all-purpose and flexible cable penetration system for complex new buildings:
public buildings, hospitals, technical-scientific institutions or in the industrial and commercial sector+ Horizontal and vertical combination possible, installation at an angle of 45° with pre-installed clamps possible, also available for precast walls or as integration into the sealing of larger areas+ Matching accessories for every purpose!
+ DafStB waterproof concrete guideline: stress class 1 + 2
KRASO Cable Penetration FBV-KDS as double wall penetration
cable penetration system for concreting | DafStB waterproof concrete guideline: stress class 1 + 2
Double wall penetration as FBV system
+ Cable penetration for the compliant integration of fresh concrete composite films+ Independent from the manufacturer: fresh concrete composite films (FBV) of all manufacturers can be integrated at the factory+ KRASO FBV Sealing Flange made of non-corrosive stainless steel V2A with 20 cm surrounding, square fresh concrete composite film+ Compatible with all other current systems! Tight due to the water pressure tight surrounding KRASO 4 Seal! Secure due to break-resistant wall material!
+ The intelligent, all-purpose and flexible cable penetration system for complex construction projects:
public buildings, hospitals, technical-scientific institutions or in industrial and commercial sectors+ With plug-in system on both sides for forming packages!
+ DafStB waterproof concrete guideline: stress class 1 + 2
