KRASOflex Joint Plate ZVB for agricultural systems












KRASOflex Joint Plate ZVB for agricultural systems
for use in agricultural systems / biogas plants in accordance with the general building authority test certificate (abZ) Z-74.101-226, incl. KRASOflex ZVB - Joint Clips for securing overlapping joints
Cement-composite joint plate with mineral special coating for agricultural systems
+ For the use in storage and filling facilities of agricultural systems and biogas plants
+ Active-mineral special coating: active and composite sealing combined in one joint plate!
+ No sticking, no protection foil and therefore less waste on the construction-site!
+ Installation independent of weather and season!
+ With
general building authority test certificate (abZ, tank filling height up to 20 m)
+ MPA-tested up to 5 bar
Info
Scope of supply:
KRASOflex ZVB for agricultural systems - joint clips (100 pcs./box)
General building authority test certificate (abZ) available on request!
Important note: Installation may only be carried out by certified specialist personnel
Downloads
KRASOflex Joint Plate ZVB for agricultural systems
Type / Item |
KRASOflex Joint Plate ZVB 100 |
KRASOflex Joint Plate ZVB 150 |
Height |
100 mm |
150 mm |
Length |
2000 mm |
2000 mm |
Packing unit |
100 metres / box |
100 metres / box |
KRASOflex Joint Plate ZVB |
7,30 € per metre |
7,80 € per metre |
KRASOflex Joint Plate ZVB for agricultural systems |
- |
12,80 € per metre |
KRASOflex Joint Plate ZVB - Desired Crack Elements FTW (precast walls) - butt joint
with mineral coating on both sides, for the controlled production and simultaneous sealing of desired crack elements in precast walls (FTW), against pressing water and non pressing water as well as soil moisture | DafStB waterproof concrete guideline: stress class 1 + 2
Cement-composite joint plate for precast walls and in-situ concrete walls+
For the controlled production and simultaneous sealing of desired crack elements + With general building authority test certificate (abP, water pressure up to 2 bar)+ MPA-tested up to 5 bar+ DafStB waterproof concrete guideline: stress class 1 + 2
KRASOflex Joint Plate ZVB - Desired Crack Elements FTW (precast walls) - corner joint
with mineral coating on both sides, for the controlled production and simultaneous sealing of desired crack elements in precast walls, against pressing and non-pressing water as well as soil moisture | DafStB waterproof concrete guideline: stress class 1 + 2Cement-composite joint plate for precast walls and in-situ concrete walls+ For the controlled production and simultaneous sealing of desired crack elements+ With general building authority test certificate (abP, water pressure up to 2 bar)+ MPA-tested up to 5 bar+ DafStB waterproof concrete guideline: stress class 1 + 2
KRASOflex Joint Plate ZVB - Desired Crack Elements OBW
with mineral coating on both sides, for the controlled production and simultaneous sealing of desired crack elements in in-situ concrete walls (OBW), against pressing and non pressing water as well as soil moisture| DafStB waterproof concrete guideline: stress class 1 + 2Cement-composite joint plate for precast walls and in-situ concrete walls+ For the controlled production and simultaneous sealing of desired cracks+ With general building authority test certificate (abP, water pressure up to 2 bar)+ MPA-tested up to 5 bar+ DafStB waterproof concrete guideline: stress class 1 + 2
Legend

Regarding our wall and pipe penetrations the KRASO 4 Seal reliably keeps pressurised water out: The material testing institute certifies a water pressure tightness up to 10 bar! Due to its construction the KRASO 4 Seal is securely fixed to the concrete. It is joined to the solid wall pipe monolithically (force-fit) in a special process. This completely prevents any creep or slippage.

Whether KRASO Pump Sumps made of concrete, Flange Plates, Tie Points or Sealing Inserts: they all offer reliable protection against pressing water due to their construction, material and processing. All these products have been tested by independent material testing institutes regarding their water pressure tightness and are proof against pressurised water up to 10 bar!

Not only against pressing water — KRASO Sealing Inserts are additionally gas- and odour-tight and therefore high-quality in terms of TA-Air! Due to a successful proof in a material testing institute our sealing inserts include the administrative regulation of the Federal Immission Control Act: “Technical Instructions on Air Quality Control TA-Air”.

Products with Torque Control Nut KRASO DKM can be installed without having to use a torque wrench. The correct torque moment is integrated in the KRASO DKM. The installation has never been so easy and installation errors can be avoided.

Radon (Rn) is a radio-active noble gas which develops in rock earth. Via ground air this colour- and odourless gas can enter basement rooms through leakages. Radon is the second most common cause for lung cancer. Pipe penetrations with KRASO 4 Seal and KRASO Sealing Inserts are gas tight and therefore reliably protect your building against the intrusion of radon.

The DVGW — The German Technical and Scientific Association for Gas and Water - certified that KRASO Sealing Inserts are gas-tight according to DIN EN13611 (sector 7.2). Our sealing inserts therefore meet the criteria for the German Association for Gas and Water.

The KRASO Builder's Convenience Box has the application from DVGW - German Technical and Scientific Association for Gas and Water - according DVGW VP 601 as house connection for gas and water and therefore fulfils all directives for a gas- and water pressure tight installation.

The so-called “fire-resistance grading” gives information about the DIN normed fire resistance of building materials. The grading shows the letter ”F” along with the time span of the functional integrity in minutes. With 180 minutes of functional integrity the fire-resistance grading F 180 therefore stands for a highly- fire-resistant material.


The “general building authority test certificate” (abP) and the “general building authority approval” (abZ) ensure compliance with building regulations and the usability of building products based on state building regulations or the model building regulations.

KRASO Products with a "FHRK Quality" – icon meet the testing specifications of FHRK e.V. - the trade association for house connections for pipes and cables. The tests cover all possible stresses on sealing inserts, house connection systems, pipe penetrations and casings: for example, gas- and water pressure tightness, abrasion resistance when backfilling formwork or resistance when compacting the building pit.

KRASO Products with the icon "FHRK Radondicht" have been tested according FHRK or/and DVGW testing specifications regarding their gas- and water pressure tightness and have also been successfully tested for diffusion resistance by the IAF. Products with this seal are radon-tight!